8-Port 10/100/1000T IP40, M12, -40...+75C Managed Industrial Switch

PLANET WGS-5225-8MT on teollisuuskäyttöön suunniteltu 8-porttinen (IP40 + M12 liittimet) hallittava Ethernet kytkin laajennetulla käyttölämpötila-alueella.

Tekniset tiedot – 8x 10/100/1000BASE-T, vibration-proof and dustproof M12 X-coded female connectors – 1 pair of bypass protection – IP40-rated metal case – Redundant power design – 9 to 48VDC, redundant power with reverse polarity protection – Active-active redundant power failure protection – Backup of catastrophic power failure on one supply – Fault tolerance and resilience – DIN-rail and wall-mount designs – Supports 6000V DC Ethernet ESD protection – -40...+75 degrees C operating temperature – Modbus TCP for real-time monitoring in SCADA system – IEEE 1588v2 PTP (Precision Time Protocol) – Layer 3 IP Routing Features – Supports maximum 32 static routes and route summarization – High performance of Store-and-Forward architecture, and runt/CRC filtering that eliminates erroneous packets to optimize the network bandwidth – Storm control support – Broadcast/Multicast/Unicast – Supports VLAN – IEEE 802.1Q tagged VLAN – Provides Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) – Private VLAN Edge (PVE) – Protocol-based VLAN – MAC-based VLAN – IP subnet-based VLAN – Voice VLAN – GVRP (GARP VLAN Registration Protocol) – Supports Spanning Tree Protocol – IEEE 802.1D Spanning Tree Protocol (STP) – IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) – IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN – BPDU Guard – Supports Link Aggregation – 802.3ad Link Aggregation Control Protocol (LACP) – Cisco ether-channel (static trunk) – Maximum 4 trunk groups, with 8 ports for each trunk – Up to 16Gbps bandwidth (full duplex mode) – Provides port mirror (many-to-1) – Port mirroring monitors the incoming or outgoing traffic on a particular port – Loop protection to avoid broadcast loops – Supports ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) – Compatible with Cisco Uni-directional link detection (UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices – Link Layer Discovery Protocol (LLDP) – Quality of Service – Ingress shaper and egress rate limit per port bandwidth control 8 priority queues on all switch ports Traffic classification IEEE 802.1p CoS ToS/DSCP/IP precedence of IPv4/IPv6 packets IP TCP/UDP port number Typical network application Strict priority and Weighted Round Robin (WRR) CoS policies Traffic-policing on the switch port DSCP remarking

Multicast

Supports IPv4 IGMP snooping v1, v2 and v3 Supports IPv6 MLD snooping v1 and v2 Querier mode support IPv4 IGMP snooping port filtering IPv6 MLD snooping port filtering MVR (Multicast VLAN Registration)

Security

Authentication IEEE 802.1x port-based/MAC-based network access authentication IEEE 802.1x authentication with guest VLAN Built-in RADIUS client to cooperate with the RADIUS servers RADIUS/TACACS+ users access authentication Access Control List IP-based Access Control List (ACL) MAC-based Access Control List (ACL) Source MAC/IP address binding DHCP Snooping to filter distrusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MACaddress to IP address binding IP Source Guard prevents IP spoofing attacks IP address access management to prevent unauthorized intruder

Management

IPv4 and IPv6 dual stack management Switch Management Interfaces Telnet command line interface Web switch management SNMP v1, v2c, and v3 switch management SSHv2 and TLSv1.2 secure access SNMP Management Four RMON groups (history, statistics, alarms, and events) SNMP trap for interface Link Up and Link Down notification IPv6 address/NTP management Built-in Trivial File Transfer Protocol (TFTP) client BOOTP and DHCP for IP address assignment System Maintenance Firmware upload/download via HTTP/TFTP Reset button for system reboot or reset to factory default Dual images DHCP relay and option 82 DHCP server User privilege levels control NTP (Network Time Protocol) Link Layer Discovery Protocol (LLDP) and LLDP-MED Network diagnostic Cable diagnostic technology provides the mechanism to detectand report potential cabling issues ICMPv6/ICMPv4 remote ping SMTP, Syslog and SNMP trap remote alarm System Log PLANET UNI-NMS (Universal Network Management) and Smart Discovery Utility for deployment management